Airgami Technical Specifications

Airgami respirators, regardless of size, harness configuration, or color, are built to the following specifications
Outer Shell USA-made, 100% waterproof, tear-resistant, non-woven polypropylene.
Air filtration media   USA-made, PM0.3, ultra-low-breathing-resistance, electrostatically-charged, meltblown polypropylene. Meets NIOSH N95 and EU143 and EU159 FFP2 and FFP3 standards even after heat disinfection.
Inner skin-contact layer Made-in-USA, ultra-lightweight, breathable, natural-polypropylene, spunbond nonwoven fabric.
Elastic harness 1/8" diameter polyester weave and natural latex elastic core. If you wish a non-latex elastic or an elastic headstrap vs. an earloop harness, please specify your request in the Note section of the checkout page when you complete your purchase.
Color Colored Airgami are printed with food-safe inks only on the outside of the respirator.
Mask weight 0.2 oz (6 grams)
Mask weight in box 1.2 oz (34 grams)
Disinfection and packaging Airgami respirators are heated in an oven to 185± 5°F (85±3°C) for 30 minutes prior to hermetic sealing in a polypropylene bag.
Nelson Labs tested Airgami passes Nelson Labs NIOSH N95 pre-certification tests for inhalation/exhalation breathing resistance and particulate penetration.
Fit testing Airgami passes N95 fit-testing using the OSHA-approved, TSI Portacount 8048 fit tester.
Reusability

Airgami and its package are reusable.

Airgami rinses in clean water. Follow these instructions to heat disinfect.

Airgami should last a month of urban daily use. Use in environments with elevated particulate concentrations may shorten its usable lifespan.

Packaging Airgami comes individually packaged in a hermetically sealed polypropylene bag inside a reusable, protective box. The box helps to keep dirt away and protect Airgami from damage between uses.